Source Monitoring Modules Permit Tracking Designed to keep an accurate record of Permits and associated information, such as, Issuing Agency, Renewal Date, Source and Parameter monitoring requirements, and company standards as well as regulatory limits. Includes a function to log Action Items related to a Permit in order to alert management of upcoming critical dates such as Permit expiration, quarterly monitoring, and annual reports. Can be integrate with sampling modules: Water, Air Emissions, LDAR and Ground Water. Water Sampling Stores sampling results from waste water discharge points by source and parameter. Used to generate DMR reports for Federal and State Agencies. Air Emissions Designed to assist companies in tracking emissions from stacks as well as fugitive emissions. Calculates uncontrolled air emissions as well as total controlled emissions for all sources within a specified view of your facility. Air emissions can be calculated for the following source types: Fuel Burning Sources using AP-42, Production Sources using AP-42 or other company derived emission factors, and Hydrocarbon Storage Tanks using AP-42.. Data can be used to: Prepare monthly and annual Emission Inventory Reports to state agencies, comply with Title V permits, and calculate air emissions for the Form R Report. LDAR Documents equipment to be tested for fugitive emissions as well as agency monitoring regulations for each type of equipment. Stores test results from inspections as well as repairs and retests. Inspection data can be entered via a hand-held data logger, a spreadsheet, or online data entry panels. Includes an expert system to automate to generate test schedules and a utility to calculate SARA 313 TCRR releases. Ground Water Monitoring Documents data on monitoring wells, stores sampling results to record water quality, and calculates statistical data for both up-gradient and down-gradient wells. Tank Inventory and Inspection Monitors the age and condition of storage tanks, both above and below ground (including information about all ancillary equipment). Records the material and amount stored in each tank, and the results of each tank inspection. Helps meet the regulatory and management reporting requirements associated with tanks. Can also be used to determine the chemical inventory levels based on average tank usage data. Chemical Management | Hazardous Waste Management | Source Monitoring | Task Management | Schedule Demo News | LDS Services | About Us and EMIS | Site Map | Links | Contact Us | Home Last Updated: May 05, 2008 Copyright © 2005, Logical Data Solutions, Inc.  All rights reserved.